Petrol generator set adopts the newest advanced technology, which is characterized by low noise, low fuel consumption, easy to move and other features.
Petrol generator set adopts the newest advanced technology, which is characterized by low noise, low fuel consumption, easy to move and other features. Electronic speed control, AVR voltage regulation and new control panel make it more convenient for you to use it; unique design makes it easy to move so that the transportation of the machine will not trouble you no longer. There are two types for your choice (single-phase and three-phase) to meet your various needs.
1) new generator should avoid sudden increase in load or the high-speed operation and the customers should use the lubricants recommended by the manufacturer as much as possible; the lubricating oils of different brands should not mix. The lubricating oil contains various additives and the mix of lubricating oil of different brands will reduce the lubricating performance, resulting in abnormal wear of the moving parts.
2) when oiling into the fuel tank, the filler should have a filter. It will be better if there is a piece of filter cloth. The fuel oil can not be used until it has stayed in the tank for 24 hours or more to realize the precipitation of water and impurities; the drain plugs should of the daily tank should always be opened to discharge the water and sediment at the bottom.
3) regular maintenance and planned maintenance are the key to prolong the service life of engine; the repair cycle and overhaul projects should be adjusted appropriately according to the purpose, usage and the properties of fuel oil and lubricants; if necessary, to conduct maintenance in advance. It will be better to make professional technical personnel perform periodic inspection and maintenance as far as possible.
New generator or stored generator needs the following maintenance after the running and operation for the initial 50 hours
1) clean or replace the air filter
2) replace the engine lubricants
3) replace or clean oil filter cartridge
4) re-tighten the bolts and nuts of each part
|Engine Type||single cylinder,four-stroke，forced cooling OHV，25°lean||single cylinder,four-stroke，forced cooling OHV，25°lean||single cylinder,four-stroke，forced cooling OHV，25°lean||single cylinder,four-stroke，forced cooling OHV，25°lean||single cylinder,four-stroke，forced cooling OHV，25°lean|
|Cylinder Diameter*Stroke (mm)||90×66||90×66||70×54||75×54||68×54|
Max. Power Output
|Start-up System||Recoil Start||Recoil Start||Recoil Start||Recoil Start||Recoil Start|
|Ignition Ssystem||Transistor Electronic Ignition||Transistor Electronic Ignition||Transistor Electronic Ignition||Transistor Electronic Ignition||Transistor Electronic Ignition|
|Fuel Capacity (L)||25||25||15||15||15|
|Continuons Operating Honrs (h)||10||10||10||10||10|